Ingots are pieces of relatively pure material, usually metal, that are cast into a suitable shape before being processed. As a semi-finished casting product, it is the first step in steelmaking.

Since long, Kesri Alloys manufactures carbon steel, alloy steel, and stainless-steel ingots, and we have gained expertise over time. We offer IBR-approved carbon steel, alloy steel, and stainless-steel ingots for open die forging, ring rolling, up-setting, and rolling applications, and we specialize in Forging Quality carbon steel, alloy steel and stainless-steel Ingots.

Specifications Supply Conditions Grades
SIZE (Inches) Shape LENGTH (Inches) Ingot WEIGHT (Kgs) approx. No of Pcs Per Heat
7X8 Square 48 335 28
9X10 Square 48 540 18
10X12 Square 54 850 10
11X13 Square     54    1000 8
11X15 Square 65 1400 6
13X16 Fluted 72 1500 6
14X18 Square 65 2200 4
17X21 Square 60 2600 3
18X21 Fluted 72 2600 3
19X22 Fluted 72 3000 3
19X22 Fluted 80 3300 3
21X25 Fluted 72 3900 2
20X24 Square 65 3600 3
20X24 Square 72 4200 2
23X27 Fluted 57 4300 2
27X32 Fluted 72 6900 1
29X35 Fluted 72 8200 1
32X39 Fluted 72 10000 1
36X42 Fluted 60 10000 1
16X16 Round 90 2200 4
20X20 Round 90 3600 3
  • Ingots are available in all grades of carbon steel, alloy steel and stainless steel
  • Ingots are suitable for rolling, ring rolling, forging and up-setting
  • Ingots are free from surface defects & cracks
  • Ingots are marked with grade, size & heat number
  • Ingots are suitable for sawing in cold condition
  • Ingots are available in spot ground or fully ground condition
  • Ingots are available in Heat Treated – annealed and tempered condition
  • Ingots are free from radioactive elements, mercury & lead contamination
Stainless Steel grades of Ingots
  • AISI 301, 302, 303, 304, 304L, 310, 316, 316L, 317, 321, 347…
  • AISI 410, 416, 420, 430, 431…
Carbon Steel Grades of Ingots
  • En8A, En8B, En8C, En8D, En9, C-45, C-50, SA 105…
  • SA 105, LF 2…
  • AISI 1008, 1010, 1015, 1018, 1020, 1025, 1030, 1040…
Alloy Steel Grades of Ingots
  • LF 3, LF 4…
  • En15A, En15B, LF2, En201…
  • 16MnCr5, 20 MnCr5, En18, En31, AISI 52100…
  • AISI 8620, 4130, 4140, 4150…
  • En19, En24, En25, En36, En47, En353, En354…
  • En19, En24, En25, En36, F-5, F-9, F-11, F-12, F-22…
About us

A Brief about Ingots

An ingot is a steel block, which is casted into a shape suitable for further processing having a cross-section which may be square, rectangular, polygonal, round, oval shaped according to the profile required. Ingots are manufactured by the freezing of a molten liquid metal in a cast iron ingot molds. Cast iron ingot molds plays a vital role in the ingot manufacturing and Kesri Alloys takes several precautions in selecting ingot molds. A variety of designs exist for the cast iron ingot molds, which may be selected to suit the physical properties of the liquid metal and the solidification process.

Firstly, the ingot mold is designed to completely solidify and form an appropriate grain structure required for later processing, as the structure formed by the freezing of liquid metal controls the physical properties of the material. Secondly, the shape and size of the mold is designed to allow for ease of ingot handling and downstream processing. Finally the ingot mold is designed to minimize liquid metal wastage as it increases manufacturing costs of ingots and will finally affect the cost of finished products. The fluted design of ingot molds increases heat transfer owing to a larger contact area. Ingot molds may be either solid “massive” design, or water-cooled shells, depending upon heat transfer requirements. Ingot molds are tapered to prevent the formation of cracks due to uneven cooling. Crack or void formation occurs as the liquid to solid transition has an associated volume change for a constant mass of material.

Formation of these ingot defects may render the cast ingot useless, and may need to be re-melted, recycled or discarded. In the early days of modern steel industry, ingot teeming was done by top pouring into tapered cast iron molds for all applications. For rolled plate applications rectangular cross section ingot molds were used. For rolled bar and some rolled strip applications the ingot molds were either square or round in shape, but for forgings, the ingots were usually round or octagonal in cross section, and particularly for the larger sizes of forgings, fluted ingots were used to reduce the risk of surface cracking during forging.

Kesri Alloys manufactures carbon steel, alloy steel and stainless steel ingots, which comes in various thickness and dimensions to meet with various industrial usages. We have developed these carbon steel, alloy steel and stainless steel ingots to the height of excellence to be in sync with set industrial norms. The ultra modern calibrated testing facilities in Kesri Alloys, ensures roll out of highest quality of carbon steel, alloy steel and stainless steel ingots. Kesri Alloys manufactures these carbon steel, alloy steel and stainless steel ingots by using hi-tech machineries, which lend these carbon steel, alloy steel and stainless steel ingots unique features and make them craze for a lot of prestigious industries. Each and every ingot which is manufactured at Kesri Alloys undergoes a rigorous inspection procedure to ensure that our clients get the finest quality. Ring rollers and forgers use these carbon steel, alloy steel and stainless steel ingots to produce parts such as gears, flanges, bearings, valves, fasteners, machine tools, daily equipments, surgical & medical parts, etc.

For Enquiries:
Let’s Get Started

Download all the facts and figures about Kesri Alloys